Thursday, October 8, 2015

BANKING TERMINOLOGIES

Capital Funds
http://www.rbi.org.in/images/bullet3.gif
Equity contribution of owners. The basic approach of capital adequacy framework is that a bank should have sufficient capital to provide a stable resource to absorb any losses arising from the risks in its business. Capital is divided into different tiers according to the characteristics / qualities of each qualifying instrument. For supervisory purposes capital is split into two categories: Tier I and Tier II.
Tier I Capital
http://www.rbi.org.in/images/bullet3.gif
A term used to refer to one of the components of regulatory capital. It consists mainly of share capital and disclosed reserves (minus goodwill, if any). Tier I items are deemed to be of the highest quality because they are fully available to cover losses Hence it is also termed as core capital.
Tier II Capital
http://www.rbi.org.in/images/bullet3.gif
Refers to one of the components of regulatory capital. Also known as supplementary capital, it consists of certain reserves and certain types of subordinated debt. Tier II items qualify as regulatory capital to the extent that they can be used to absorb losses arising from a bank's activities. Tier II's capital loss absorption capacity is lower than that of Tier I capital.
Revaluation reserves
http://www.rbi.org.in/images/bullet3.gif
Revaluation reserves are a part of Tier-II capital. These reserves arise from revaluation of assets that are undervalued on the bank's books, typically bank premises and marketable securities. The extent to which the revaluation reserves can be relied upon as a cushion for unexpected losses depends mainly upon the level of certainty that can be placed on estimates of the market values of the relevant assets and the subsequent deterioration in values under difficult market conditions or in a forced sale.
Leverage
http://www.rbi.org.in/images/bullet3.gif
Ratio of assets to capital.
Capital reserves
http://www.rbi.org.in/images/bullet3.gif
That portion of a company's profits not paid out as dividends to shareholders. They are also known as undistributable reserves and are ploughed back into the business.
Deferred Tax Assets
http://www.rbi.org.in/images/bullet3.gif
Unabsorbed depreciation and carry forward of losses which can be set-off against future taxable income which is considered as timing differences result in deferred tax assets. The deferred Tax Assets are accounted as per the Accounting Standard 22.
Deferred Tax Liabilities
http://www.rbi.org.in/images/bullet3.gif
Deferred tax liabilities have an effect of increasing future year's income tax payments, which indicates that they are accrued income taxes and meet definition of liabilities.


Subordinated debt
http://www.rbi.org.in/images/bullet3.gif
Refers to the status of the debt. In the event of the bankruptcy or liquidation of the debtor, subordinated debt only has a secondary claim on repayments, after other debt has been repaid.
Hybrid debt capital instruments
http://www.rbi.org.in/images/bullet3.gif
In this category, fall a number of capital instruments, which combine certain characteristics of equity and certain characteristics of debt. Each has a particular feature, which can be considered to affect its quality as capital. Where these instruments have close similarities to equity, in particular when they are able to support losses on an ongoing basis without triggering liquidation, they may be included in Tier II capital.
BASEL Committee on Banking Supervision
The BASEL Committee is a committee of bank supervisors consisting of members from each of the G10 countries. The Committee is a forum for discussion on the handling of specific supervisory problems. It coordinates the sharing of supervisory responsibilities among national authorities in respect of banks' foreign establishments with the aim of ensuring effective supervision of banks' activities worldwide.





Market Discipline
Market Discipline seeks to achieve increased transparency through expanded disclosure requirements for banks.

Mortgage Back Security

http://www.rbi.org.in/images/bullet3.gif
A bond-type security in which the collateral is provided by a pool of mortgages. Income from the underlying mortgages is used to meet interest and principal repayments.
Derivative
A derivative instrument derives its value from an underlying product. There are basically three derivatives
a) Forward Contract- A forward contract is an agreement between two parties to buy or sell an agreed amount of a commodity or financial instrument at an agreed price, for delivery on an agreed future date. Future Contract- Is a standardized exchange tradable forward contract executed at an exchange. In contrast to a futures contract, a forward contract is not transferable or exchange tradable, its terms are not standardized and no margin is exchanged. The buyer of the forward contract is said to be long on the contract and the seller is said to be short on the contract.
b) Options- An option is a contract which grants the buyer the right, but not the obligation, to buy (call option) or sell (put option) an asset, commodity, currency or financial instrument at an agreed rate (exercise price) on or before an agreed date (expiry or settlement date). The buyer pays the seller an amount called the premium in exchange for this right. This premium is the price of the option.
c) Swaps- Is an agreement to exchange future cash flow at pre-specified Intervals. Typically one cash flow is based on a variable price and other on affixed one.
Non Performing Assets (NPA)
http://www.rbi.org.in/images/bullet3.gif
An asset, including a leased asset, becomes non performing when it ceases to generate income for the bank.
Net NPA
http://www.rbi.org.in/images/bullet3.gif
Gross NPA – Total provisions held.
Substandard Assets
http://www.rbi.org.in/images/bullet3.gif
A substandard asset would be one, which has remained NPA for a period less than or equal to 12 months. Such an asset will have well defined credit weaknesses that jeopardize the liquidation of the debt and are characterised by the distinct possibility that the banks will sustain some loss, if deficiencies are not corrected.
Doubtful Asset
http://www.rbi.org.in/images/bullet3.gif
An asset would be classified as doubtful if it has remained in the substandard category for a period of 12 months. A loan classified as doubtful has all the weaknesses inherent in assets that were classified as substandard, with the added characteristic that the weaknesses make collection or liquidation in full, - on the basis of currently known facts, conditions and values - highly questionable and improbable.
Loss Asset
http://www.rbi.org.in/images/bullet3.gif
A loss asset is one where loss has been identified by the bank or internal or external auditors or the RBI inspection but the amount has not been written off wholly. In other words, such an asset is considered uncollectible and of such little value that its continuance as a bankable asset is not warranted although there may be some salvage or recovery value.
Off Balance Sheet Exposure
http://www.rbi.org.in/images/bullet3.gif
Off-Balance Sheet exposures refer to the business activities of a bank that generally do not involve booking assets (loans) and taking deposits. Off-balance sheet activities normally generate fees, but produce liabilities or assets that are deferred or contingent and thus, do not appear on the institution's balance sheet until and unless they become actual assets or liabilities.
Net Interest Income ( NII)
http://www.rbi.org.in/images/bullet3.gif
The NII is the difference between the interest income and the interest expenses.
Net Interest Margin
http://www.rbi.org.in/images/bullet3.gif
Net interest margin is the net interest income divided by average interest earning assets.
Return on Asset (ROA)- After Tax
http://www.rbi.org.in/images/bullet3.gif
Return on Assets (ROA) is a profitability ratio which indicates the net profit (net income) generated on total assets. It is computed by dividing net income by average total assets. Formula- (Profit after tax/Av. Total assets)*100
Return on equity (ROE)- After Tax
http://www.rbi.org.in/images/bullet3.gif
Return on Equity (ROE) is a ratio relating net profit (net income) to shareholders’ equity. Here the equity refers to share capital reserves and surplus of the bank. Formula- Profit after tax/(Total equity + Total equity at the end of previous year)/2}*100
CASA Deposit
http://www.rbi.org.in/images/bullet3.gif
Deposit in bank in current and Savings account.
Liquid Assets
http://www.rbi.org.in/images/bullet3.gif
Liquid assets consists of: cash, balances with RBI, balances in current accounts with banks, money at call and short notice, inter-bank placements due within 30 days and securities under “held for trading” and “available for sale” categories excluding securities that do not have ready market.
ALM
http://www.rbi.org.in/images/bullet3.gif
Asset Liability Management (ALM) is concerned with strategic balance sheet management involving all market risks. It also deals with liquidity management, funds management, trading and capital planning.
ALCO
http://www.rbi.org.in/images/bullet3.gif
Asset-Liability Management Committee (ALCO) is a strategic decision making body, formulating and overseeing the function of asset liability management (ALM) of a bank.
Venture Capital Fund
http://www.rbi.org.in/images/bullet3.gif
A fund set up for the purpose of investing in startup businesses that is perceived to have excellent growth prospects but does not have access to capital markets.
Held Till Maturity(HTM)
http://www.rbi.org.in/images/bullet3.gif
The securities acquired by the banks with the intention to hold them up to maturity.
Held for Trading(HFT)
http://www.rbi.org.in/images/bullet3.gif
Securities where the intention is to trade by taking advantage of short-term price / interest rate movements.
Available for Sale(AFS)
http://www.rbi.org.in/images/bullet3.gif
The securities available for sale are those securities where the intention of the bank is neither to trade nor to hold till maturity. These securities are valued at the fair value which is determined by reference to the best available source of current market quotations or other data relative to current value.
Yield to maturity (YTM) or Yield
http://www.rbi.org.in/images/bullet3.gif
The Yield to maturity (YTM) is the yield promised to the bondholder on the assumption that the bond will be held to maturity and coupon payments will be reinvested at the YTM. It is a measure of the return of the bond.
CRR
http://www.rbi.org.in/images/bullet3.gif
Cash reserve ratio is the cash parked by the banks in their specified current account maintained with RBI.
SLR
http://www.rbi.org.in/images/bullet3.gif
Statutory liquidity ratio is in the form of cash (book value), gold (current market value) and balances in unencumbered approved securities.
LIBOR
http://www.rbi.org.in/images/bullet3.gif
London Inter Bank Offered Rate. The interest rate at which banks offer to lend funds in the interbank market.
Basis Point
http://www.rbi.org.in/images/bullet3.gif
Is one hundredth of one percent. 1 basis point means 0.01%. Used for measuring change in interest rate/yield.
Fraud
http://www.rbi.org.in/images/bullet3.gif
Frauds have been classified as under, based mainly on the provisions of the Indian Penal Code
(a) Misappropriation and criminal breach of trust.
(b) Fraudulent encashment through forged instruments, manipulation of books of account or through fictitious accounts and conversion of property.
(c) Unauthorised credit facilities extended for reward or for illegal gratification.
(d) Negligence and cash shortages.
(e) Cheating and forgery.
(f) Irregularities in foreign exchange transactions.
(g) Any other type of fraud not coming under the specific heads as above.
Securitization
http://www.rbi.org.in/images/bullet3.gif
A process by which a single asset or a pool of assets are transferred from the balance sheet of the originator (bank) to a bankruptcy remote SPV (trust) in return for an immediate cash payment.
Special Purpose Vehicle (SPV)
http://www.rbi.org.in/images/bullet3.gif
An entity which may be a trust, company or other entity constituted or established by a ‘Deed’ or ‘Agreement’ for a specific purpose.
Bankruptcy remote
http://www.rbi.org.in/images/bullet3.gif
The legal position with reference to the creation of the SPV should be such that the SPV and its assets would not be touched in case the originator of the securitization goes bankrupt and its assets are liquidated.
Commercial real estate
http://www.rbi.org.in/images/bullet3.gif
commercial real estate is defined as “fund based and non-fund based exposures secured by mortgages on commercial real estates (office buildings, retail space, multi-purpose commercial premises, multi-family residential buildings, multi-tenanted commercial premises, industrial or warehouse space, hotels, land acquisition, development and construction etc.)”

KYC Norms & Anti Money laundering  Measures in Banking
Objectives:
1.      Protect  banks from  financial frauds and from being used  by criminals who are engaged  in money laundering
2.      Make Bank employees understand  their customers  better  and their financial dealings  and to manage  any risk associated prudently
3.      To strengthen  customer identification  and monitoring of accounts
Policy:
Customer Acceptance
Customer Identification procedure
Monitoring of  transactions
Monitoring  and reporting suspicious activities

FIU-IND  ( Financial Intelligence  Unit of India)
STR – Suspicious Transaction Report

Marketing and Banking   specialization:

Marketing covers not only goods  but also services. Banking is also a service industry  where the concepts  and application  of marketing is used.  Banks are relatively new to marketing.  As Banking industry shifted from class banking to mass banking , the needs and  wants of their customers  multiplied.

 Also in view of large numbers  of existing banks as well as new banks  coming up the competition intensified in the market. These developments contributed in the development of  the marketing  approach  among banks.
Marketing in Banks is the process of satisfying  the financial  and banking needs   and wants of customers

Different types of Deposits

Different types of loans and advances
What is  MSME ?- Micro, Small and Medium Enterprises 

Priority sector loans are those loans  given to borrowers  specified by RBI under its s priority sector lending  guidelines  for loans to Agriculture, Small Scale Industries, Retail trade, Water/Transport operators, Professional and self employed , Housing Loans ( upto 25 lacs)  etc. Every Bank has to  lend 40 %  of their lendable resources  to this sector.

Retail loans are those that are given to customers  such as  Home Loans , Car Loans, Personal  loans, Gold loans etc.

ECS :Electronic Clearing System is an electronic payment /receipt  for transactions that are repetitive  and periodical in nature. ECS enables  bulk transfer  of funds from one bank  account to many bank accounts or vice versa- ECS Debit and ECS Credit


Bank Computerisation was mooted by which Committee: Dr C Rangarajan
MICR : Magnetic Ink Character recognition
NEFT:/ RTGS

Why Banking as a career?
It is expected that Indian Economy  register  a double digit growth during the  next two to three decades.  This provides  enormous  amount of challenges  and opportunities  for the growth   of the  banking  sector within India
56.90% of  India’s population  belongs to the age group of  15-59 years . We have only 7.50 %   of the population   belonging to the age category  above 60 years.

The population growth will increase and  in future there will a very good demand for retail  banking products. More over  the next challenge is financial inclusion, ie banking for all ..
Technology leveraging is maximum done in banking sector.

All these are giving a lot of opportunities for  a  structured career growth. I am sure that I  also can grow  with the growth and development of the banking system.
Banking sector gives an opportunity  for continuous  learning  including the latest technology. That means we can always travel with the  technology . The educational  and training opportunities  provided by Banks are  enormous.

India vision 2020 says  India will become 4th largest economy. I am sure that Banks will have a  substantial part  to play in this  progress. I also want to be a part of this process by working in a Bank.

Inflation  refers to a persistent rise in prices. Simply put , it is a situation of too much money  and too few goods. Thus due to  scarcity of goods and presence  of many buyers , the prices are pushed up.

ASBA   Application supported by Blocked  Amounts- used an alternative  payment system in IPO applications. No need of sending  money with application. Simply block it in the respective accounts  and earn interest.

ALM – Asset Liability Management   is a comprehensive  framework for measuring, monitoring and managing  the market  risk of a bank. It is the  management  of  structure of  balance sheet ( liabilities and assets) in such a way  that the  net earnings is maximized.

Base rate : is for the Banks to set a level of minimum  interest  rates charged  while giving out the  loans.

IFSC Code: Indian Financial System Code: used for interbank transfers through NEFT and RTGS.

Financial inclusion is the delivery of  financial services  at affordable  costs to sections of disadvantaged and low  income segments  of society.

Tuesday, October 6, 2015

INVENTORY VALUATION

Introduction to Inventory and Cost of Goods Sold
Inventory is merchandise purchased by merchandisers (retailers, wholesalers, distributors) for the purpose of being sold to customers. The cost of the merchandise purchased but not yet sold is reported in the account Inventory or Merchandise Inventory.
Inventory is reported as a current asset on the company's balance sheet. Inventory is a significant asset that needs to be monitored closely. Too much inventory can result in cash flow problems, additional expenses (e.g., storage, insurance), and losses if the items become obsolete. Too little inventory can result in lost sales and lost customers.
Because of the cost principle, inventory is reported on the balance sheet at the amount paid to obtain (purchase) the merchandise, not at its selling price.
Inventory is also a significant asset of manufacturers. However, in order to simplify our explanation, we will focus on a retailer.
Cost of Goods Sold
Cost of goods sold is the cost of the merchandise that was sold to customers. The cost of goods sold is reported on the income statement when the sales revenues of the goods sold are reported.
A retailer's cost of goods sold includes the cost from its supplier plus any additional costs necessary to get the merchandise into inventory and ready for sale. For example, let's assume that Corner Shelf Bookstore purchases a college textbook from a publisher. If Corner Shelf's cost from the publisher is $80 for the textbook plus $5 in shipping costs, Corner Shelf reports $85 in its Inventory account until the book is sold. When the book is sold, the $85 is removed from inventory and is reported as cost of goods sold on the income statement.
When Costs Change
If the publisher increases the selling prices of its books, the bookstore will have a higher cost for the next book it purchases from the publisher. Any books in the bookstore's inventory will continue to be reported at their cost when purchased. For example, if the Corner Shelf Bookstore has on its shelf a book that had a cost of $85, Corner Shelf will continue to report the cost of that one book at its actual cost of $85 even if the same book now has a cost of $90. The cost principle will not allow an amount higher than cost to be included in inventory.
Let's assume the Corner Shelf Bookstore had one book in inventory at the start of the year 2014 and at different times during 2014 purchased four identical books. During the year 2014 the cost of these books increased due to a paper shortage. The following chart shows the costs of the five books that have to be accounted for. It also assumes that none of the books has been sold as of December 31, 2014.
Description: 12X-table-01
Special Feature: Review what you are learning by working the three interactive crossword puzzles dedicated to this topic. They are completely free. Inventory & Cost of Goods Sold Puzzles
Cost Flow Assumptions
If the Corner Shelf Bookstore sells only one of the five books, which cost should Corner Shelf report as the cost of goods sold? Should it select $85, $87, $89, $89, $90, or an average of the five amounts? A related question is which cost should Corner Shelf report as inventory on its balance sheet for the four books that have not been sold?
Accounting rules allow the bookstore to move the cost from inventory to the cost of goods sold by using one of three cost flows:
  1. First In, First Out (FIFO)
  2. Last In, First Out (LIFO)
  3. Average
Note that these are cost flow assumptions. This means that the order in which costs are removed from inventory can be different from the order in which the goods are physically removed from inventory. In other words, Corner Shelf could sell the book that was on hand at December 31, 2013 but could remove from inventory the $90 costof the book purchased in December 2014 (if it elects the LIFO cost flow assumption).

Inventory Systems

Each of the three cost flow assumptions listed above can be used in either of two systems (or methods) of inventory:
A. Periodic
B. Perpetual
A. Periodic inventory system. Under this system the amount appearing in the Inventory account is not updated when purchases of merchandise are made from suppliers. Rather, the Inventory account is commonly updated or adjusted only once—at the end of the year. During the year the Inventory account will likely show only the cost of inventory at the end of the previous year.
Under the periodic inventory system, purchases of merchandise are recorded in one or more Purchasesaccounts. At the end of the year the Purchases account(s) are closed and the Inventory account is adjusted to equal the cost of the merchandise actually on hand at the end of the year. Under the periodic system there is noCost of Goods Sold account to be updated when a sale of merchandise occurs.
In short, under the periodic inventory system there is no way to tell from the general ledger accounts the amount of inventory or the cost of goods sold.
B. Perpetual inventory system. Under this system the Inventory account is continuously updated. The Inventory account is increased with the cost of merchandise purchased from suppliers and it is reduced by the cost of merchandise that has been sold to customers. (The Purchases account(s) do not exist.)
Under the perpetual system there is a Cost of Goods Sold account that is debited at the time of each sale for the cost of the merchandise that was sold. Under the perpetual system a sale of merchandise will result in two journal entries: one to record the sale and the cash or accounts receivable, and one to reduce inventory and to increase cost of goods sold.

Inventory Systems and Cost Flows Combined

The combination of the three cost flow assumptions and the two inventory systems results in six available options when accounting for the cost of inventory and calculating the cost of goods sold:
A1. Periodic FIFO
A2. Periodic LIFO
A3. Periodic Average
B1. Perpetual FIFO
B2. Perpetual LIFO
B3. Perpetual Average

A1. Periodic FIFO

"Periodic" means that the Inventory account is not routinely updated during the accounting period. Instead, the cost of merchandise purchased from suppliers is debited to an account called Purchases. At the end of the accounting year the Inventory account is adjusted to equal the cost of the merchandise that has not been sold. The cost of goods sold that will be reported on the income statement will be computed by taking the cost of the goods purchased and subtracting the increase in inventory (or adding the decrease in inventory).
"FIFO" is an acronym for First In, First Out. Under the FIFO cost flow assumption, the first (oldest) costs are the first ones to leave inventory and become the cost of goods sold on the income statement. The last (or recent) costs will be reported as inventory on the balance sheet.
Remember that the costs can flow differently than the goods. If the Corner Shelf Bookstore uses FIFO, the owner may sell the newest book to a customer, but is allowed to report the cost of goods sold as $85 (the first, oldest cost).
Let's illustrate periodic FIFO with the amounts from the Corner Shelf Bookstore:
Description: 12X-table-02
As before, we need to account for the total goods available for sale (5 books at a cost of $440). Under FIFO we assign the first cost of $85 to the one book that was sold. The remaining $355 ($440 - $85) is assigned to inventory. The $355 of inventory costs consists of $87 + $89 + $89 + $90. The $85 cost assigned to the book sold is permanently gone from inventory.
If Corner Shelf Bookstore sells the textbook for $110, its gross profit under periodic FIFO will be $25 ($110 - $85). If the costs of textbooks continue to increase, FIFO will always result in more profit than other cost flows, because the first cost is always lower.

A2. Periodic LIFO

"Periodic" means that the Inventory account is not updated during the accounting period. Instead, the cost of merchandise purchased from suppliers is debited to an account called Purchases. At the end of the accounting year the Inventory account is adjusted to equal the cost of the merchandise that is unsold. The other costs of goods will be reported on the income statement as the cost of goods sold.
"LIFO" is an acronym for Last In, First Out. Under the LIFO cost flow assumption, the last (or recent) costs are the first ones to leave inventory and become the cost of goods sold on the income statement. The first (or oldest) costs will be reported as inventory on the balance sheet.
Remember that the costs can flow differently than the goods. In other words, if Corner Shelf Bookstore uses LIFO, the owner may sell the oldest (first) book to a customer, but can report the cost of goods sold of $90 (the last cost).
It's important to note that under LIFO periodic (not LIFO perpetual) we wait until the entire year is over before assigning the costs. Then we flow the year's last costs first, even if those goods arrived after the last sale of the year. For example, assume the last sale of the year at the Corner Shelf Bookstore occurred on December 27. Also assume that the store's last purchase of the year arrived on December 31. Under LIFO periodic, the cost of the book purchased on December 31 is sent to the cost of goods sold first, even though it's physically impossible for that book to be the one sold on December 27. (This reinforces our previous statement that the flow of costs does not have to correspond with the physical flow of units.)
Let's illustrate periodic LIFO by using the data for the Corner Shelf Bookstore:
Description: 12X-table-03
As before we need to account for the total goods available for sale: 5 books at a cost of $440. Under periodic LIFO we assign the last cost of $90 to the one book that was sold. (If two books were sold, $90 would be assigned to the first book and $89 to the second book.) The remaining $350 ($440 - $90) is assigned to inventory. The $350 of inventory cost consists of $85 + $87 + $89 + $89. The $90 assigned to the book that was sold is permanently gone from inventory.
If the bookstore sold the textbook for $110, its gross profit under periodic LIFO will be $20 ($110 - $90). If the costs of textbooks continue to increase, LIFO will always result in the least amount of profit. (The reason is that the last costs will always be higher than the first costs. Higher costs result in less profits and usually lower income taxes.)

A3. Periodic Average

Under "periodic" the Inventory account is not updated and purchases of merchandise are recorded in an account called Purchases. Under this cost flow assumption an average cost is calculated using the total goods available for sale (cost from the beginning inventory plus the costs of all subsequent purchases made during the entire year). In other words, the periodic average cost is calculated after the year is over—after all the purchases of the year have occurred. This average cost is then applied to the units sold during the year as well as to the units in inventory at the end of the year.
As you can see, our facts remain the same-there are 5 books available for sale for the year 2014 and the cost of the goods available is $440. The weighted average cost of the books is $88 ($440 of cost of goods available ÷ 5 books available) and it is used for both the cost of goods sold and for the cost of the books in inventory.
Description: 12X-table-04
Since the bookstore sold only one book, the cost of goods sold is $88 (1 x $88). The four books still on hand are reported at $352 (4 x $88) of cost in the Inventory account. The total of the cost of goods sold plus the cost of the inventory should equal the total cost of goods available ($88 + $352 = $440).
If Corner Shelf Bookstore sells the textbook for $110, its gross profit under the periodic average method will be $22 ($110 - $88). This gross profit is between the $25 computed under periodic FIFO and the $20 computed under periodic LIFO.

Perpetual FIFO

Under the perpetual system the Inventory account is constantly (or perpetually) changing. When a retailer purchases merchandise, the retailer debits its Inventory account for the cost; when the retailer sells the merchandise to its customers its Inventory account is credited and its Cost of Goods Sold account is debited for the cost of the goods sold. Rather than staying dormant as it does with the periodic method, the Inventory account balance is continuously updated.
Under the perpetual system, two transactions are recorded when merchandise is sold: (1) the sales amount is debited to Accounts Receivable or Cash and is credited to Sales, and (2) the cost of the merchandise sold is debited to Cost of Goods Sold and is credited to Inventory. (Note: Under the periodic system the second entry is not made.)
With perpetual FIFO, the first (or oldest) costs are the first moved from the Inventory account and debited to the Cost of Goods Sold account. The end result under perpetual FIFO is the same as under periodic FIFO. In other words, the first costs are the same whether you move the cost out of inventory with each sale (perpetual) or whether you wait until the year is over (periodic).

B2. Perpetual LIFO

Under the perpetual system the Inventory account is constantly (or perpetually) changing. When a retailer purchases merchandise, the retailer debits its Inventory account for the cost of the merchandise. When the retailer sells the merchandise to its customers, the retailer credits its Inventory account for the cost of the goods that were sold and debits its Cost of Goods Sold account for their cost. Rather than staying dormant as it does with the periodic method, the Inventory account balance is continuously updated.
Under the perpetual system, two transactions are recorded at the time that the merchandise is sold: (1) the sales amount is debited to Accounts Receivable or Cash and is credited to Sales, and (2) the cost of the merchandise sold is debited to Cost of Goods Sold and is credited to Inventory. (Note: Under the periodic system the second entry is not made.)
With perpetual LIFO, the last costs available at the time of the sale are the first to be removed from the Inventory account and debited to the Cost of Goods Sold account. Since this is the perpetual system we cannot wait until the end of the year to determine the last cost—an entry must be recorded at the time of the sale in order to reduce the Inventory account and to increase the Cost of Goods Sold account.
If costs continue to rise throughout the entire year, perpetual LIFO will yield a lower cost of goods sold and a higher net income than periodic LIFO. Generally this means that periodic LIFO will result in less income taxes than perpetual LIFO. (If you wish to minimize the amount paid in income taxes during periods of inflation, you should discuss LIFO with your tax adviser.)
Once again we'll use our example for the Corner Shelf Bookstore:
Description: 12X-table-05
Let's assume that after Corner Shelf makes its second purchase in June 2014, Corner Shelf sells one book. This means the last cost at the time of the sale was $89. Under perpetual LIFO the following entry must be made at the time of the sale: $89 will be credited to Inventory and $89 will be debited to Cost of Goods Sold. If that was the only book sold during the year, at the end of the year the Cost of Goods Sold account will have a balance of $89 and the cost in the Inventory account will be $351 ($85 + $87 + $89 + $90).
If the bookstore sells the textbook for $110, its gross profit under perpetual LIFO will be $21 ($110 - $89). Note that this is different than the gross profit of $20 under periodic LIFO.

B3. Perpetual Average

Under the perpetual system the Inventory account is constantly (or perpetually) changing. When a retailer purchases merchandise, the costs are debited to its Inventory account; when the retailer sells the merchandise to its customers the Inventory account is credited and the Cost of Goods Sold account is debited for the cost of the goods sold. Rather than staying dormant as it does with the periodic method, the Inventory account balance under the perpetual average is changing whenever a purchase or sale occurs.
Under the perpetual system, two sets of entries are made whenever merchandise is sold: (1) the sales amount is debited to Accounts Receivable or Cash and is credited to Sales, and (2) the cost of the merchandise sold is debited to Cost of Goods Sold and is credited to Inventory. (Note: Under the periodic system the second entry is not made.)
Under the perpetual system, "average" means the average cost of the items in inventory as of the date of the sale. This average cost is multiplied by the number of units sold and is removed from the Inventory account and debited to the Cost of Goods Sold account. We use the average as of the time of the sale because this is aperpetual method. (Note: Under the periodic system we wait until the year is over before computing the average cost.)
Let's use the same example again for the Corner Shelf Bookstore:
Description: 12X-table-06
Let's assume that after Corner Shelf makes its second purchase, Corner Shelf sells one book. This means the average cost at the time of the sale was $87.50 ([$85 + $87 + $89 + $89] ÷ 4]). Because this is a perpetual average, a journal entry must be made at the time of the sale for $87.50. The $87.50 (the average cost at the time of the sale) is credited to Inventory and is debited to Cost of Goods Sold. After the sale of one unit, three units remain in inventory and the balance in the Inventory account will be $262.50 (3 books at an average cost of $87.50).
After Corner Shelf makes its third purchase, the average cost per unit will change to $88.125 ([$262.50 + $90] ÷ 4). As you can see, the average cost moved from $87.50 to $88.125—this is why the perpetual average method is sometimes referred to as the moving average method. The Inventory balance is $352.50 (4 books with an average cost of $88.125 each).

Comparison of Cost Flow Assumptions

Below is a recap of the varying amounts for the cost of goods sold, gross profit, and ending inventory that were calculated above.
Description: 12X-table-07
The example assumes that costs were continually increasing. The results would be different if costs were decreasing or increasing at a slower rate. Consult with your tax advisor concerning the election of cost flow assumption.

Specific Identification

In addition to the six cost flow assumptions presented in Parts 1 - 4, businesses have another option: expense to the cost of goods sold the specific cost of the specific item sold. For example, Gold Dealer, Inc. has an inventory of gold and each nugget has an identification number and the cost of the nugget. When Gold Dealer sells a nugget, it can expense to the cost of goods sold the exact cost of the specific nugget sold. The cost of the other nuggets will remain in inventory. (Alternatively, Gold Dealer could use one of the other six cost flow assumptions described in Parts 1 - 4.)

LIFO Benefits Without Tracking Units

In Part 1 and Part 2 you saw that during the periods of increasing costs, LIFO will result in less profits. In the U.S. this can mean less income taxes paid by the company. Most companies view lower taxes as a significant benefit. However, the process of tracking costs and then assigning those costs to the units sold and the units on hand could be too expensive for the amount of income tax savings. To gain the benefit of LIFO without the tracking of costs, there is a method known as dollar value LIFO. This topic is discussed in intermediate accounting textbooks. The Internal Revenue Service also allows companies to use dollar value LIFO by applying price indexes. (You should seek the advice of an accounting and/or tax professional to assess the cost and benefit of these techniques.)

Inventory Management

Over the past few decades sophisticated companies have made great strides in reducing their levels of inventory. Rather than carry large inventories, they ask their suppliers to deliver goods "just in time." Suppliers and merchandisers have learned to coordinate their purchases and sales so that orders and shipments occur automatically.
A company will realize significant benefits if it can keep its inventory levels down without losing sales or production (if the company is a manufacturer). For example, Dell Computers has greatly reduced its inventory in relationship to its sales. Since computer components have been dropping in costs as new technologies emerge, it benefits Dell to keep only a very small inventory of components on hand. It would be a financial hardship if Dell had a large quantity of parts that became obsolete or decreased in value.

Financial Ratios

Keeping track of inventory is important. There are two common financial ratios for monitoring inventory levels: (1) the Inventory Turnover Ratio, and (2) the Days' Sales in Inventory. (These are discussed and illustrated in the Explanation of Financial Ratios.)

Estimating Ending Inventory

It is very time-consuming for a company to physically count the merchandise units in its inventory. In fact, it is not unusual for companies to shut down their operations near the end of their accounting year just to perform inventory counts. The company may assign one set of employees to count and tag the items and another set to verify the counts. If a company has outside auditors, they will be there to observe the process. (Even if the company's computers keep track of inventory, accountants require that the computer records be verified by actually counting the goods.)
If a company counts its inventory only once per year it must estimate its inventory at the end of each month in order to prepare meaningful monthly financial statements. In fact, a company may need to estimate its inventory for other reasons as well. For example, if a company suffers a loss due to a disaster such as a tornado or a fire, it will need to file a claim for the approximate cost of the inventory that was lost. (An insurance adjuster will also compute this amount independently so that the company is not paid too much or too little for its loss.)

Methods of Estimating Inventory

There are two methods for estimating ending inventory:
1. Gross Profit Method
2. Retail Method
1. Gross Profit Method. The gross profit method for estimating inventory uses the information contained in the top portion of a merchandiser's multiple-step income statement:
Description: 12X-table-08
Let's assume that we need to estimate the cost of inventory on hand on June 30, 2014. From the 2013 income statement shown above we can see that the company's gross profit is 20% of the sales and that the cost of goods sold is 80% of the sales. If those percentages are reasonable for the current year, we can use those percentages to help us estimate the cost of the inventory on hand as of June 30, 2014.
While an algebraic equation could be constructed to determine the estimated amount of ending inventory, we prefer to simply use the income statement format. We prepare a partial income statement for the period beginning after the date when inventory was last physically counted, and ending with the date for which we need the estimated inventory cost. In this case, the income statement will go from January 1, 2014 until June 30, 2014.
Some of the numbers that we need are easily obtained from sales records, customers, suppliers, earlier financial statements, etc. For example, sales for the first half of the year 2014 are taken from the company's records. The beginning inventory amount is the ending inventory reported on the December 31, 2013 balance sheet. The purchases information for the first half of 2014 is available from the company's records or its suppliers. The amounts that we have available are written in italics in the following partial income statement:
Description: 12X-table-09
We will fill in the rest of the statement with the answers to the following calculations. The amounts in italics come from the statement above. The bold amount is the answer or result of the calculation.
Description: 12X-table-steps-1
This can also be calculated as 80% x Sales of $56,000 = $44,800.
Inserting this information into the income statement yields the following:
Description: 12X-table-10
As you can see, the ending inventory amount is not yet shown. We compute this amount by subtracting cost of goods sold from the cost of goods available:
Description: 12X-table-steps-2
Below is the completed partial income statement with the estimated amount of ending inventory at $26,200. (Note: It is always a good idea to recheck the math on the income statement to be certain you computed the amounts correctly.)
Description: 12X-table-11
2. Retail Method. The retail method can be used by retailers who have their merchandise records in both cost and retail selling prices. A very simple illustration for using the retail method to estimate inventory is shown here:
Description: 12X-table-12
As you can see, the cost amounts are arranged into one column. The retail amounts are listed in a separate column. The Goods Available amounts are used to compute the cost-to-retail ratio. In this case the cost of goods available of $80,000 is divided by the retail amount of goods available ($100,000). This results in a cost-to-retail ratio, or cost ratio, of 80%.
To arrive at the estimated ending inventory at cost, we multiply the estimated ending inventory at retail ($10,000) times the cost ratio of 80% to arrive at $8,000.

Additional Information and Resources

Because the material covered here is considered an introduction to this topic, many complexities have been omitted. You should always consult with an accounting professional for assistance with your own specific circumstances.